환영, 로그인   |   처음 방문한 사람? 만들기 새 계정
장바구니가 비어 있습니다.

이득 평면화 Erbium doped 광섬유 증폭기s EDFA-BA-GF-25-SM 25dBm 300mW 데스크탑 유형

New Pirce 최신 가격 (Click Here 여 기 를 클릭 하 십시오. )

Add to Cart:


이득 평면화 Erbium doped 광섬유 증폭기s EDFA-BA-GF-25-SM 25dBm 300mW 데스크탑 유형

The gain flat erbium-doped 광섬유 증폭기 is a series of 광섬유 증폭기s specially designed for optical fiber communication systems. It can simultaneously amplify multiple wavelength signals in the C-band, and maintain the same gain between wavelengths, with a gain flatness of ≤1.5 dB. It has the advantages of wide spectrum, multiple wavelengths, flat gain, high gain and low noise.
Multi-wavelength Gain Flatness Erbium doped 광섬유 증폭기  (GF EDFA )  is a family of 광섬유 증폭기 products dedicated to optical fiber communication systems,it has multi wavelength and gain flattening, and high gain and low noise advantages, support PC software control, compact, easy to integrate, but also according to customer needs to provide desktop or rack type packaging.

There are two types EDFA.(Current product is Booster - Amplifier.)
Pre - Amplifier, referred to as PA, that is preamplifier, used in the -40 ~ -25 dBm range of small light signal amplification, typical gain of 35 dB;
Booster - Amplifier, referred to as BA, is used to enhance the power of the optical signal in the range of - 6 ~ + 3 dBm, with a maximum output power of 27 dBm;
 

[특성]
Wide working wavelength range;
High gain and flat gain;
Good temperature adaptability.

[신청]
Optical fiber communication
optical fiber sensor
fiber laser

[명세서]

매개변수

Unit

일반적인 값

비고

Model

--

EDFA-PA-GF

EDFA-BA-GF
(Current Product)

부스터 증폭기

Wavelength Range

nm

1530~1560nm

C-band

Input power

dBm

-32~-25

-26~-10

 

Output power

dBm

15

25

25dBm(300mW)

Gain coefficient

dB

25

 

Noise index

dB

5

 

Gain flatness

dB

1.5(Type)  0.8(Min)

 

Polarization dependent gain

dB

<0.3

 

Polarization mode dispersion

ps

0.5

 

Input/output isolation

dB

>35

 

Pigtail fiber type

--

SMF-28 Single Mode fiber

 

Pigtail connector type

--

FC/APC

 

Work mode

--

ACC

ACC/APC

*메모1

 
 

*메모1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.

 

Electrical and environmental 매개변수

데스크탑 유형
(Current product)

Module Type

Control method

Button

RS232 Serial communication

Communication interface

DB9 Female
(Default not include)

DB9 Female

Power supply

100~240V AC, <30W

5V DC, <15W

Size

260(W)×280(D)×120(H)mm

125(W)×150(D)×20(H)mm

Operating temperature range

-5~+35°C

Operating humidity range

0~70%

 

 

 

 

 

 

Erbium-doped 광섬유 증폭기 EDFA

Erbium-doped 광섬유 증폭기 EDFA

Erbium-doped 광섬유 증폭기 EDFA

Erbium-doped 광섬유 증폭기 EDFA

Erbium-doped 광섬유 증폭기 EDFA

 

 

 







wabusiness template