환영, 로그인   |   처음 방문한 사람? 만들기 새 계정
장바구니가 비어 있습니다.

20dBm 100mW Erbium-doped Fiber 부스터 증폭기 Module in Micro Format 50x50x15mm

New Pirce 최신 가격 (Click Here 여 기 를 클릭 하 십시오. )

Add to Cart:


20dBm 100mW Erbium-doped Fiber 부스터 증폭기 Module in Micro Format 50x50x15mm

Erbium-doped fiber power amplifier (BA, Booster-Amplifier) is usually used to increase the power of optical signals in the range of -6dBm~+3dBm or higher, with a maximum saturation power of 26dBm, which is usually used to increase the emission power of laser light sources.

[특징]
Wide wavelength range
High output power
Low noise

[응용 프로그램]
Optical Fiber Communication
Fiber optic sensing
Fiber laser

[명세서]

Parameter Unit 일반적인 값 비고
Wavelrngth Range nm 1530~1565 C Band
Input Power dBm -6~+3  
Saturated Output Power dBm 20 @-3dBm input
Noise Index dB 5.0 @-3dBm input
Polarization Dependent Gain dB <0.3  
Polarization Mode Dispersion ps 0.5  
Input/출력 절연 dB >35  
Pigtail Fiber Type   SMF-28 single-mode fiber  
Fiber Interface Type   FC/APC  
Working Mode   ACC / APC *메모1
Control Method   TTL serial communication  
Communication Interface   XH2.54-4PIN  
Power Supply   5V DC, <10W  
Size mm 50(W)×50(D)×15(H)  
Operating Temperature °C -5~+35°C  
Operating Humidity Range   0~70%  


*메모1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.

 

C-Band EDFA

C-Band EDFA
 






wabusiness template