High Power PM Amplifier L-Band 30dBm 1W EDFA Fiber Optic Equipment EYDFA-L-HP-BA-30-PM 모듈 유형
The high-power polarization-maintaining erbium-doped 광섬유 증폭기 is based on the principle of laser amplification of optical signals in erbium-doped fibers, and adopts a unique multi-stage optical amplification design and a reliable high-power laser heat dissipation process to achieve high-power polarization-maintaining output of 1570~1605nm wavelength laser.
[특징]
High output power .
High gain factor.
Low noise.
[응용 프로그램]
Fiber communication
Fiber optic sensing
Lidar
[사양]
|
매개변수
|
Unit
|
일반적인 값
|
비고
|
|
Model
|
--
|
EYDFA-L-HP-BA-30-PM
|
|
|
Wavelength Range
|
nm
|
1570~1605
|
L-band
|
|
Input Power
|
dBm
|
-6~+10
|
|
|
Saturated Output Power
|
dBm
|
30
|
@0dBm input
|
| Output 전력 조정 가능 범위 |
-- |
10%~100%
|
|
|
Noise Figure
|
dB
|
<6.0
|
@0dBm input
|
|
Polarization Extinction Ratio
|
dB
|
23(Type)，20(Min)
|
|
|
Input/출력 절연
|
dB
|
>35
|
|
|
Pigtail Fiber Type
|
--
|
PM1550 polarization-maintaining fiber
|
|
|
Fiber Interface Type
|
--
|
FC/APC
|
For power testing only
|
|
Work Mode
|
--
|
ACC / APC
|
*메모1
|
|
Electrical and environmental 매개변수
|
데스크탑 유형
|
Module Type
(Current product)
|
|
Control Method
|
Button
|
RS232 Serial communication
|
|
Communication Interface
|
DB9 Female
(Default not include)
|
DB9 Female
|
|
Power Supply
|
100~240V AC, <150W
|
12V DC, <60W
|
|
Size
|
260(W)×320(D)×120(H)mm
|
125(W)×150(D)×31.5(H)mm
|
|
Operating Temperature Range
|
-5~+35°C
|
|
Operating Humidity Range
|
0~70%
|
*메모1:
ACC mode - automatic current control: The EDFA pumping operating current is set by the user and automatically locked by the EDFA to achieve a constant pumping current. When the input optical power fluctuates, the output power will also fluctuate accordingly, which is suitable for all EDFA models.
APC mode - automatic power control: The signal light output power of the EDFA is set by the user, the PD automatically monitors and feeds back the output power, the EDFA control and the adaptive adjustment pump achieve the stability of the output signal. When the input optical power fluctuates, the APC mode minimizes the fluctuation of the output power and is suitable for power type and line type EDFA.
Follow us on Twitter
Facebook page
CivilLaser YouTube